Maintaining The Hardware; Cautions And Warnings - PaloAlto Networks PA-200 Hardware Reference Manual

May 20, 2015 - Palo Alto Networks COMPANY CONFIDENTIAL

Chapter 3

Maintaining the Hardware

This chapter provides maintenance information for the PA-200 hardware. For more
information, refer to the following topics:
•
"Cautions and Warnings" in the next section
•
"Interpreting the Device LEDs" on page 12
•
"Interpreting the Port LEDs" on page 13

Cautions and Warnings

This section describes the cautions and warnings that you must be familiar with before
working with the hardware:
•
"Hardware Cautions" on page 11
•
"Hardware Warnings" on page 11
Hardware Cautions
•
Disconnect the power cord before servicing the PA-200 firewall.
•
Shielded Ethernet interface cables should be used to ensure agency compliance with
electromagnetic emissions (EMC). Connecting a PoE enabled port to the firewall is not
recommended because the system does not support the PoE operating mode.
•
To prevent damage from electrical surges, use a Uninterruptible Power Supply (UPS) and
implement the facilities lightning protection requirements outlined in the National Fire
Protection Association (NFPA) 780: Standard for the Installation of Lightning Protection
Systems (or similar effective measures per local regulations).
Hardware Warnings
•
Risk of explosion if the battery is replaced with an incorrect type. Dispose of used
batteries in accordance with government regulations.
Palo Alto Networks Maintaining the Hardware • 11