Attaching The Leader Pin Attach Tool To The Cartridge; Cartridge - IBM TotalStorage Ultrium T800 Operator's Manual

The following procedure describes how to reattach a leader pin.
To reattach a leader pin by using the IBM Leader Pin Reattachment Kit:
Figure 22. Attaching the leader pin attach tool to the cartridge. To hold the cartridge door
open, hook the tool into the door and pull the tool back.
64
IBM TotalStorage Ultrium Tape Drive
1. Attach the leader pin attach tool ( 1 in Figure 22) to the cartridge 2 so that
the tool's hook 3 latches into the cartridge's door 4 . Pull the tool back to
hold the door open, then slide the tool onto the cartridge. Open the tool's
pivot arm 5 .