Updating The Firmware With An Fmr Tape Cartridge - IBM TotalStorage Ultrium T800 Operator's Manual

Updating the Firmware with an FMR Tape Cartridge

Attention:
images.
To update the drive's firmware from an FMR tape cartridge:
1. Ensure that a cartridge is not loaded in the drive.
2. Place the drive in maintenance mode by pressing the Unload Button three
3. Press the Unload Button once per second until
4. Insert the FMR tape cartridge.
The drive resets itself and automatically activates the new firmware.
If the update fails, an error code displays. To resolve the error, locate the code in
Table 15 on page 75.
50
IBM TotalStorage Ultrium Tape Drive
SCSI drives and Fibre Channel drives require different firmware
Tip
After creating an FMR tape (see "Function Code 3: Create FMR Tape" on
page 35), the firmware of multiple drives can be updated with the same FMR
tape. After updating the drive firmware, unmake the FMR tape (see
"Function Code 8: Unmake FMR Tape" on page 38) and use it as a data
cartridge.
times within a two seconds. The Status Light becomes solid amber, which
means that the drive is in maintenance mode.
hold the button for three seconds. When
cartridge.
firmware from the cartridge, and the Status Light flashes amber. When the
update completes successfully,
ejects.
8
displays, then press and
C
flashes, the drive is waiting for a
8
flashes, the drive loads the updated
0
displays and the cartridge automatically