Using The External Roll Holder - LabelStation Pro200 series User Manual

Make sure hands are not placed in the printer when closing the top cover.
Do not free fall the top cover.
Failure to securely close and lock the cover will result in poor print quality.
Printer Top
Cover
Teflon Bar
Paper
Guide
2.3.1. Using the External Roll Holder (Optional)
•
Attach an external roll holder to the bottom of the printer by lining up the notches on
the holder to the holes on the base of the printer
• Open the printer top cover by pushing forward the top cover open levers.
•
The top cover support will hold the printer top cover.
• Install a roll of labels (loaded onto the label spindle) on the external paper roll mount.
• Feed the labels through the external label feed opening through the rear paper guide.
Fig. 9. Correct Label installation
Fig.10. Attaching the External Roll Holder
- 11 -
© Advanced Labelling Limited July 2008
Support Bar
Paper Roll Mount
Top Cover Open Lever
LabelStation Pro Series Set Up Manual July 2008