Getting Started; Unpacking Your Labelstation Pro Series; Equipment Checklist - LabelStation Pro200 series User Manual

1. GETTING STARTED

1.1.

Unpacking your LabelStation Pro Series

The printer has been specially packaged to withstand damage in the shipping process. However,
upon receiving the LabelStation Pro Series printer, carefully inspect the package and the
device. In case of evident damage, contact Advanced Labelling Systems directly to specify the
nature and extent of the damage. Please retain the packaging materials in case you need to reship
the printer.
1.2.

Equipment Checklist

• LabelStation Pro Series printer
• Ribbon paper core
•
Ribbon supply/rewind spindle (2 pcs.)
• Label supply roll spindle (1 inch diameter core)
• Auto Switching Power supply
• Power cord
•
Parallel interface cable
• USB cable
• Installation guide
• Label design software CD-ROM
If any parts are missing, please contact the customer service department of Advanced
Labelling Systems – 01202 683212
Separately purchased items may also be included, please check these items against your order or
delivery note.
These additional items may include:
• Continuous Rolls, Die Cut Labels, Cable Markers
• External Label Roll Holder
• Print Ribbon (this is usually fitted to your printer prior to dispatch).
•
Memory module
• Cutter Unit (this is usually fitted to your printer prior to dispatch).
• Portable mini keyboard
•
LabelStation Pro Series Industrial Symbols CD-ROM
© Advanced Labelling Limited July 2008
- 4 - LabelStation Pro Series Set Up Manual July 2008