Specifications And Warranties; Printer Specifications - LabelStation Pro200 series User Manual

3.5.

SPECIFICATIONS AND WARRANTIES

3.5.1.

Printer Specifications

Item
Mechanism
Resolution
Max. Print Width
Max. Print Length
Ribbon Capacity
Printing Speed
Peeler function
Printing Method
Enclosure
Structure
Dimension
Operation Panel
Hardware
Sensor
Memory
Interface
Power
Firmware
Font Type
Rotation
Barcode Format
Command Set
Environment
Operation
Storage
LabelStation Pro Series
203 dpi.
108 mm.
1000 mm ( 39" ).
300 meter with 1" core. (Max. OD 67 mm)
2, 3, 4 and 5 ips.
2, 3 ips
Direct thermal and thermal transfer printing
Double-walled plastic.
314mm(L) x 213mm(W) x 188mm(H)
One push switch, and one indicator LED (Green,
Orange, Red colours).
Transmissive sensor (offset 6 mm from liner edge).
Reflective sensor (position adjustable).
Head open micro switch.
Ribbon end sensor
1M byte Flash memory
2M bytes DRAM
RS-232C (max baud rate, 19,200 bps).
USB: V1.1.
Centronics.
AC input: 100-240V universal auto switching power
supply.
DC output: 24V 3.75A.
Note: Use only the LabelStation Pro Series power
supply; failure to do so could cause serious
damage to the LabelStation Pro Series printer.
8 alpha-numeric bitmap fonts, and 1 true type font.
0, 90,180 and 270 degrees.
1D Bar code
Code 39, Code 93, Code 128UCC, Code128
subsets, A.B.C, Codabar, Interleave 2 of 5, EAN-8,
EAN-13, EAN-128, UPC-A, UPC-E, EAN and UPC2(5)
digits add-on, MSI, PLESSEY, POSTNET, CPOST
2D Bar code
PDF-417, Maxicode, and DataMatrix.
TSPL2
Temperature: 5°C ~ 40°C.
Relative Humidity: 25% ~ 85% (Non condensing)
Temperature: -40°C ~ 60°C.
Relative Humidity: 10% ~ 90% (Non Condensing)
- 22 -
© Advanced Labelling Limited July 2008
LabelStation Pro Series Set Up Manual July 2008