LabelStation Pro200 series User Manual page 3

3.3. Troubleshooting
3.3.1. LED Status
3.3.1.1. No Power
3.3.1.2. The Printer is on and ready to use
3.3.1.3. The Printer is paused
3.3.1.4. The Printer is out of labels or ribbons or the printer setting is not correct.
3.3.2. Print Quality
3.3.2.1. Continuous feeding labels
3.3.2.2. No print on the label
3.3.2.3. Poor print quality
3.4. LED & Button Operation
3.4.1. LED
3.4.2. Button Operation
3.5. Specifications and Warranties
3.5.1. Printer Specifications
3.5.2. Label Stock Specifications
3.5.3. Ribbon Stock Specifications
3.5.4. Options
3.6. Compliances
3.7. Warranty Information
3.7.1. Thermal Print Head
3.7.2. Warranty Service Procedures
3.7.3. General Warranty Provision
3.7.4. Limitation of Liability
© Advanced Labelling Limited July 2008
- 3 - LabelStation Pro Series Set Up Manual July 2008