Setting - Marantz VP-10S1 User Manual

Setting

You can make the following settings.
Menu
Picture Adjust
Setting
System
Display
Config
Trigger 2
Preset
Lamp Mode High / Low
High Bright On, Off
High Bright On : Display brightest image.
Aspect Full, Normal, Zoom, Through
OSD Position 16:9, 4:3, Through
VCR Mode On, Off
Cinema Auto, Off
Cinema mode: 2-3 pulldown for NTSC, 2-2
for PAL
Black Setup 0IRE, 7.5IRE
/NORMAL, EXPAND (For DVI input)
Adjusts black level to the source.
– OSD Position
You can select from three positions: 16:9, 4:3 and Through.
Menu
Picture Adjust Contrast 50
Setting Brightness 44
System Coior 58
Display
Sharpness 7
0
Config Tint
Trigger 2 Noise Reduction 0
Color Temp. 3
Preset
Fine Menu
OSD position for 16:9
– VCR Mode
On : Stabilizes the picture. Use to play back video or input TV signals of weak electromagnetic waves if the image
is unstable when the mode is off.
Off : Normally use this mode.
❖
How to Operate the Setting Menu
1.
Select the desired menu item and press the
The setting item will appear on the screen.
3 4
2.
Use the and
1
3. Press the button to enter the setting and return to menu item selection.
ENTER
2
Downloaded From projector-manual.com Marantz Manuals
Standard 1
Lamp Mode High
High Bright Off
Aspect Full
OSD Position 16:9
VCR Mode Off
Auto
Cinema
Black Setup 0 IRE
Standard 1
2
buttons to set the item.
PATTERN INPUT
1,3
Menu
Standard 1
Picture Adjust Contrast 50
Setting Brightness 44
System Coior 58
Display Sharpness 7
0
Config Tint
0
Trigger 2 Noise Reduction
Preset Color Temp. 3
Fine Menu
OSD position for 4:3
button.
MENU V-MUTE
ENTER
INPUT ASPECT
Menu
Standard 1
Picture Adjust Contrast 50
Setting Brightness 44
System Coior 58
Display Sharpness 7
Config Tint 0
Trigger 2 Noise Reduction 0
Preset Color Temp. 3
Fine Menu
OSD position for Through
2.
1, 3
29