Error Mode; On Screen Message - Marantz VP-10S1 User Manual

ERROR MODE

WARNING indicator, POWER ON indicator, and STANDBY indicator diagnose error mode of the projector as follows.
Error mode
Lamp cover
Lamp
Temperature
Fan
Color temperature
adjustment
Other

ON SCREEN MESSAGE

Use the list below to check the message displayed on the screen.
Message
NO SIGNAL
REPLACE LAMP!
OUT OF RANGE
Downloaded From projector-manual.com Marantz Manuals
Indicators
WARNING POWER ON
ON OFF
ON OFF
Flashing OFF
Flashing OFF
ON OFF
Flashing OFF
Meaning
No input signal.
The lamp has reached the end of its life.
Improper signal feed to the projector.
Possible Cause
STANDBY
The lamp cover is not
Flashing
closed properly.
The lamp has failed, or
the lamp is completely
OFF
worn out.
Projector internal
Flashing
temperature is higher
than the allowed level.
Trouble has occurred
ON
with the fan.
Color temperature
ON
adjustment failed.
Internal program error
OFF
Properly connect the cables.
Replace the lamp and reset lamp life.
Adjust resolution, V(Hz) : refresh rate of the
equipment, referring to the Timing Chart.
Recommendation
Close the cover correctly.
Replace the lamp and
reset lamp life.
Check if anything is
blocking the exhaust vent.
Retry adjustment.
Shut power OFF and
ON again.
Remedy
43