Initial Setting; Turning On The Power; Adjust The Zoom, Focus And Keystone - Marantz VP8600 User Manual

INITIAL SETTING

Turning on the Power

1.
Connect the mains cord to the projector. Connect the other end to a wall outlet.
Turn on the main power switch. The Power LED blinks (blue) slowly.
2.
Remove the lens cover.
3. Turn on the connected devices.
4.
Press the ON button on the remote controller to turn on the projector.
The Power LED lights blue and the projector splash screen displays.
3 4
5.
Press the INPUT or INPUT key to select the input signal source.
V-MUTE
FREEZE
ON/OFF
CON-
10
STANDBY ON
COMP.1 COMP.2 S VIDEO FULL
C1 C2 S F
DVI RGB VIDEO NORMAL
DV1 RGB V N
THEATER STANDARD DYNAMIC ZOOM1
THTR STD DYN Z1
LOW -BRIGHT- HIGH C-TEMP ZOOM2
LB HB CT Z2
MENU
M
INPUT
F E
EXIT
PIP
INPUT SWAP MENU
CONTRAST BRIGHTNESS
CON+ BRI- BRI+

Adjust the Zoom, Focus and Keystone

1.
Use the ZOOM ring (on the projector) to resize the projected image and screen size.
2.
Use the FOCUS ring (on the projector) to sharpen the projected image.
3.
Press MENU on the remote control to open the OSD.
34
4.
Press to select Config. and then press ENTER.
1 2
5. Press to adjust the horizontal keystone and then press ENTER.
1 2
6.
Press to adjust the vertical keystone and then press ENTER.
7.
Press the EXIT button twice to close the OSD.
V-MUTE
5, 6
FREEZE
FOCUS RING
ZOOM RING
4
3
MENU
M
INPUT
F E
7
EXIT
PIP