Table of Contents
Advertisement
Proteus operation manual
Move the cursor down to the second line and change the mode to Multi
as shown. Proteus will now respond to multiple MIDI channels.
MORE ADVANCED SEQUENCING
PRE-SEQUENCE SETUP
Suppose that you want to have your sequencer set up everything for you
before the start of the song. Good idea. This will make the Proteus setup
procedure automatic and prevent the wrong presets from playing.
The basic idea of a pre-sequence setup is to send out MIDI information
just before the start of the song. This MIDI information will select all the
proper presets, adjust the mix, and pan positions of each preset.
Note: Proteus setup information should be transmitted from the se-
quencer before the song actually starts, perhaps during a lead-in measure
or countdown. DO NOT send setup information just before the first beat
of the song or MIDI timing errors could result.
INITIAL SETUP
In the Master menu:
1) Turn ON Multi-Mode
2) Turn ON Preset Change enable for each channel.
3) Turn OFF MIDI Enable on MIDI channels that are to be used for other
synthesizers.
PRESET, VOLUME and PAN SETUP
Program your MIDI sequencer to transmit the following information
before the song starts.
1) Select the proper presets for each MIDI channel used on Proteus.
2) Send MIDI volume information (controller #7) for each MIDI channel
used on Proteus.
3) Send MIDI pan information (controller #10) for each MIDI channel
used on Proteus.
Advanced Sequencing
PROGRAMMING PROTEUS
I The Preset, Volume,
and Pan information for
all 16 channels is
cluded when the Master
settings are transmitted
or received.
69
in-
Hide quick links:
Advertisement
Table of Contents
