Performance Setup; Studio Setup - E-Mu Proteus Operation Manual

10
Connection Instructions - Studio Setup
Setup #2 STUDIO SETUP
MIDI Controller
(MIDI Keyboard, Sequencer, etc.)
MIDI Out
In In
MIDI Switcher
Out In
MIDI
IN OUT
MIDI In - In this setup, Proteus is controlled by MIDI messages received
at the MIDI In connector which have been routed by a MIDI switcher. The
MIDI switcher allows any MIDI controller such as a MIDI keyboard,
MIDI wind controller, or a computer to be easily connected.
MIDI Out - The MIDI Out jack is normally used to transmit program data
to a computer or other device.
Outputs - Proteus has three sets of programmable stereo outputs; Main,
Sub 1, and Sub 2. Specific Proteus instruments can be routed to one of
these stereo pairs in order to be further processed or mixed separately.
Computer
MIDI Out MIDI In
Out
Out
OUTPUTS
MONO
SUB 2 SUB 1 MAIN
THRU R L R L R
Proteus operation manual
Additional
MIDI
Devices
MIDI In
POWER
STEREO
L