E-Mu Proteus Operation Manual page 20

18
Mix Output
MASTER MENU
M Warning: Presets
will not be transferred
between two Proteus'
unless the ID numbers
of both units match.
MIX OUTPUT
This function allows you override the output assignments made in each
preset and instead assign the outputs according to MIDI channel. This
also allows you to change the output assignment of the factory presets.
For each of the 16 MIDI channels, you can select the Main, Sub 1, or Sub
2 outputs, or "P". When "P" is selected, the output assignment selected in
the preset is used. If no plugs are inserted into the sub outputs, the audio
will be automatically directed to the main outputs.
MIX OUTPUT
channel 01:P
MIDI MODE
This function selects one of the four MIDI modes and the MIDI system
exclusive ID number.
I Omni mode - Proteus responds to note information on all MIDI
channels and plays the preset currently displayed in the main screen.
I Poly mode - Proteus only responds to note information received on the
currently selected MIDI channel (on the preset selection screen) and plays
that channel's associated preset.
I Multi mode - Proteus responds to data on any combination of MIDI
channels and plays the specific preset associated with each of the MIDI
channels.
I Mono mode - Proteus responds to data on any combination of MIDI
channels but plays each channel monophonically. If a new note on a
channel is played before the last note is released, the envelopes will not
be retriggered (legato). Mono mode is particularly useful with alternate
controllers such as MIDI guitars, etc.
I ID number - This function allows an external programming unit to
distinguish between multiple Proteus units. In the case of multiple
Proteus units, each Proteus should have a different ID number.
MIDI MODE
Omni
Proteus operation manual
ID
00