E-Mu Proteus Operation Manual page 21

Proteus operation manual
MIDI MODE CHANGE
This function selects whether or not MIDI mode change commands are
accepted or ignored when received over MIDI (see MIDI Mode).
MIDI MODE CHANGE
Disabled
MIDI OVERFLOW
When on, if you play more notes than the Proteus has channels (32), the
additional note data will be directed out the MIDI Out port to a second
Proteus or other MIDI device. MIDI Overflow can be turned On or Off.
MIDI OVERFLOW
Off
MIDI ENABLE
When in MIDI Multi mode, this function lets you turn each MIDI channel
On or Off. This is useful when you have other MIDI devices connected and
do not want the Proteus to respond to the MIDI channels reserved for the
other devices. MIDI Enable only operates in Multi Mode.
MIDI ENABLE
channel:01
PRESET CHANGE
This function lets the Proteus utilize or ignore incoming MIDI preset
change commands for each channel. Note that MIDI can only select
presets 000-127. Presets 128-191 can either be selected manually or over
MIDI using the mapping function "MIDI PROGRAM ➙ PRESET".
PRESET CHANGE
channel:01
On
On
MIDI Mode Change
MASTER MENU
19