Programming Proteus; Linking Presets - E-Mu Proteus Operation Manual

63
Proteus operation manual

Linking Presets

PROGRAMMING PROTEUS

This section is an introduction to the Edit menu, explains the concept of
Proteus Synthesis, and contains specific programming examples and tips.
LINKING PRESETS
Linking presets is a quick and easy way to create new sounds by "layering
presets" and also to "split" the keyboard into sections containing differ-
ent sounds.
LAYERING TWO PRESETS
1) Select the first preset you wish to layer.
2) Press the Edit button.
3) Use the data entry control to move through the screens until you find
one of the "LINK" screens.
4) Move the cursor to the second line of the display, then select the preset
that you want to be linked with this preset. You may want to play the
keyboard as you scroll through the various presets in order to hear the
results.
5) If you want the link to be a permanent part of the preset, be sure to
"SAVE PRESET".
CREATE A SPLIT KEYBOARD USING LINKS
1) Follow steps 1 through 4 above.
2) Now set the range of the linked preset while still in the LINK menu.
3) Save the preset.
4) Now go back to the first preset, press the Edit button and use the data
entry control to move through the screens to KEY RANGE.
5) Set the range of this preset so that it fills the remaining range of your
keyboard.
6) Save the preset.