E-Mu Proteus Operation Manual page 11

Proteus operation manual
MIDI Controller
(MIDI Keyboard, Sequencer, etc.)
MIDI Out
MIDI
IN OUT
Sub Output
Return
(To Main Output)
Tip
To Effect
SEND/RETURN CABLES
MIDI In - Proteus is controlled by MIDI messages received at the MIDI In
connector. Connect the MIDI In of Proteus to the MIDI Out connector of
a MIDI controller such as a MIDI keyboard, MIDI wind controller, or
MIDI guitar controller.
MIDI Thru - The MIDI Thru jack is used to connect additional MIDI
devices onto the MIDI chain. MIDI Thru transmits an exact copy of the
messages received at the MIDI In jack.
Outputs - Each of the Sub 1 and Sub 2 output jacks on the Proteus are
stereo jacks. The tip of each jack (accessed when a standard phone plug is
inserted) connects to the left or right output of that group.
Setup #3 PERFORMANCE SETUP
Additional
MIDI
Devices
MIDI In
OUTPUTS
MONO
SUB 2 SUB 1
THRU
R L R L
Effect Device
Effect Device
Ring
From Effect
Connection Instructions- Performance Setup
POWER
STEREO
MAIN
R L
11