Table of Contents
Advertisement
29
Proteus operation manual
Modulation Sources
PROGRAMMING BASICS
MODULATION SOURCES
The Proteus uses three kinds of modulation sources.
I KEYBOARD and VELOCITY MODULATION
Values which are generated at the start of a note and do not change during
the note.
Keyboard Key - Which key is pressed.
Key Velocity - How hard the key is pressed.
I REALTIME MODULATION
Values which can be continuously changed during the entire duration of
the sound.
Pitch Wheel - A synthesizer pitch bend wheel.
Miscellaneous Controllers (4) - Any type of MIDI controller data.
Keyboard Pressure (mono aftertouch) - Key pressure applied after the
key is initially pressed.
Polyphonic Key Pressure - Pressure from a controller capable of
generating polyphonic pressure data.
Low Frequency Oscillators (2) - Generate repeating waves.
Envelope Generators (2) - Generate a programmable "contour" which
changes over time when a key is pressed.
I FOOTSWITCH MODULATION
Changes a parameter when one of the three footswitches are pressed. The
footswitches can be programmed to switch: Sustain (pri/sec/both),
Alternate Volume Envelope (pri/sec/both), Alternate Volume Release
(pri/sec/both), or Cross-Switch between the primary and secondary
instruments.
Hide quick links:
Advertisement
Table of Contents
