Basic Operation - E-Mu Proteus Operation Manual

Proteus operation manual
MAIN CONTROLS
MIDI EDIT MENU
ACTIVITY
POWER MASTER
POWER
SWITCH
MASTER MENU
SELECT
I Power Switch - Switches AC power to the Proteus ON and OFF.
I MIDI Activity LED - Indicates that MIDI data is being received.
I Master Menu Select Button - The Master menu contains parameters
that affect the entire machine, not just certain presets. An illuminated LED
above the button indicates that you are in the Master menu.
I Edit Menu Select Button - The Edit menu is used when you want to
change parameters of a preset. An illuminated LED above the button
indicates that you are in the Edit menu.
I Enter Button - The Enter button is used to initiate a particular operation
within the Proteus. The red LED above the enter button flashes to let you
know that the Proteus is waiting for your response.
I Cursor Control - This button moves the cursor to the next parameter
on the display. (The cursor is a little flashing line underneath one of the
parameters in the display.) Press the cursor control repeatedly until the
cursor is underneath the desired parameter. The cursor can also be moved
bidirectionally using the data entry control while the cursor select button
is being held down (i.e. Press and hold the cursor button and turn the data
entry knob).
I Data Entry Control - The data entry control is a stepped, variable
control which is used to change parameter values. The control increments
or decrements the current value one unit with each click.
I Volume Control - This is the master volume control for all audio
outputs. Note: For maximum dynamic range, set this control at full level.
SELECT
EDIT ENTER
C01 Vol127 Pan+0
000 Preset Name
DISPLAY
ENTER
BUTTON

BASIC OPERATION

CURSOR VOLUME
CONTROL CONTROL
CURSOR DATA
DATA ENTRY
CONTROL
Main Controls
VOLUME
13