Crossfade Amount; Cross-Switch Point; Lfo - Shape And Amount - E-Mu Proteus Operation Manual

Proteus operation manual

CROSSFADE AMOUNT

The crossfade amount parameter determines the range over which
crossfading will occur. Crossfade amount is variable from 000 to 255. The
larger the value, the more modulation will be required to effect a complete
crossfade.
XFADE AMOUNT
1 2 8

CROSS-SWITCH POINT

The cross-switch point parameter determines the point at which cross-
switching will occur when key position or velocity is controlling cross-
switch.
SWITCH POINT
064
Velocity
LFO 1 - SHAPE and AMOUNT
This screen controls the waveshape and amount of Low Frequency
Oscillator 1. The LFO can be used to produce vibrato (when routed to
pitch), or tremolo (when routed to volume). The five LFO waveshapes
are: Triangle, Sine, Square, Sawtooth, and Random. The amount can be
varied from -128 to +127. Negative values will produce inverted wave-
shapes.
LFO1
Triangle
Sine
Square
c#2
Key
SHAPE AMT
Rand +127
Sawtooth
Random
51
Crossfade Amount
EDIT MENU