Coarse Tuning; Fine Tuning; Chorus; Delay - E-Mu Proteus Operation Manual

46

Coarse Tuning

EDIT MENU
COARSE TUNING
This function allows you to change the tuning of the primary and
secondary instruments in semitone intervals. The coarse tuning range is
-36 to +36 semitones. A coarse tuning setting of "00" would indicate that
the instrument is tuned to concert pitch (A=440 Hz).
TUNING coarse
pri:+00

FINE TUNING

This function allows you to change the tuning of the primary and
secondary instruments in 1/64 semitone intervals (approx. 1.56 cents).
The fine tuning range is ± 1 semitone.
TUNING fine
pri:+00

CHORUS

Chorus "thickens" the sound by doubling the sound and then detuning
it. Proteus/1 chorus can be only be turned On or Off. Proteus/2 and above
allow you select the chorus amount from a range of 1 to 15. When Chorus
is on, the number of channels used by an instrument will be doubled.
Proteus/1
CHORUS
pri:On sec:Off

DELAY

Delay varies the time between when a MIDI Note On message is received
and the onset of a note. The delay time is adjustable from 0 to 13 seconds
(000-127).
DELAY
pri:000
sec:+00
sec:+00
Proteus/2 and above
CHORUS
pri:Off
sec:000
Proteus operation manual
sec:07