E-Mu Proteus Operation Manual page 128

126
MIDI Specifications
ADDENDUM TO MIDI SPECIFICATION
EXPANDED PRESETS
An expanded Proteus/1 will contain additional factory presets in ROM.
The additional presets can be uploaded using the "preset/bank request"
command. The new presets will be in bank #3 (0x403) for non-XR, and
bank #6 (0x406) for XR versions.
PRODUCT ID
The product ID code is the same for all configurations.
CONFIGURATION MESSAGE
A new MIDI command has been added to identify the sound sets in a
given Proteus. The configuration request command is:
F0 18 04 dd 0C F7
Proteus will respond to this command with the configuration message:
F0 18 04 dd 0D pl pm s1 l1 m1 s2 l2 m2 F7
where pl and pm are the lsb and msb of the total number of presets, s1 and
s2 are the ID numbers of the sound sets contained in this unit, and
n1=l1,m1 and n2=l2,m2 represent the lsb and msb of the number of
instruments in each sound set. If no expansion set is present, s2 will be 7F
and n2 will be zero. If the Proteus contains firmware earlier than version
2.10, no response will be given, and one can assume sound set #0.
The current configurations are as follows:
Product
Proteus/1
Proteus/2
Proteus/1 + Orchestral
Proteus/1 + Invision
Proteus/3
Sound Set(s)
0
1, 2
0, 2
0, 3
4
Proteus operation manual