Advertisement
Projector Features
Used to configure the projector for each show. Each
"Macro") as defined in the Communicator software.
Keypad
HD-SDI Module
Input Module
Used for communication from projector to server and
theater management system. Also used for laptop
connection, for upgrades and running Communicator.
button is linked to a list of commands (called a
Press once to turn the lamp on.
Press once to open the dowser.
Press once to turn the lamp off.
Press once to close the dowser.
= Green
= Red
Accepts data signals from alternative
content devices. LEDs indicate sync
from the server. LEDs indicate sync status,
status, and if input is selected.
Quick Start Guide — Operators
Press to enable and cycle through
= Green
= Red
4 test patterns. To return to
normal operations, press a fifth
time, or select a macro. Note that
the button turns green when boot-
up is complete.
Positions the image on screen.
Used for manual override.
Adjusts primary image focus.
This security feature must be used
if the projector's light engine
compartment is opened, or if any
boards are removed.
Increases or decreases image size.
Accepts an encrypted content data stream
and if the input is selected.
These features are not
typically used for normal
operations. The video
server sends commands to
the projector to control
these functions.
Advertisement
