Whirlpool ACM052MM Service Manual page 48

Perform the following steps to install the Con-
densate Drain Adapter:
1. Position the gasket and adapter so that
the flat side faces up.
Gasket
Drain Adapter
Flat Side
7-2
2. Mount the adapter and gasket to the two
predrilled mounting holes in the rear of the
base plate with the two hex-head screws
provided.
3. Slide the end of a length of tubing over the
end of the adapter, and route it to the
drainage location.
Base Plate
Mounting Holes
Drain Adapter & Gasket
Hex-Head Screws