Sheet Printing Is Selected - Canon imagePROGRAF iPF6000S User Manual

Roll feed unit err
The Roll Feed Unit is not working.
No Roll Feed Unit.
The printer has received a print job that species
rolls, but the Roll Feed Unit is not installed.

Sheet printing is selected.

You have attempted to print a test print sheet or other
printer status information on a sheet, but no sheet
is loaded.
Manual printing is selected, but a roll is loaded.
A print job for manually printing on sheets was sent
when a roll is loaded.
Downloaded from ManualsPrinter.com Manuals
Cause
Cause
Cause
Cause
Corrective Action
Turn off the printer, remove the Roll Feed Unit
momentarily, and then reinstall it.
(→P.143)
(→P.144)
If the message is still displayed after you do this,
contact your Canon dealer for assistance.
Corrective Action
Install the Roll Feed Unit and resend the print job.
(→P.144)
Corrective Action
Load a sheet and try printing again.
To print on a roll instead, hold the Stop button for
more than a second to cancel printing, load a roll,
and then print.
(→P.88)
Corrective Action
Follow these step to reload a sheet.
1.
Press the Load/Eject button.
The roll can now be removed.
2.
Load paper of the type and size you have specied
in the printer driver.
The printer will resume printing.
If there is a printed roll in the Output Tray, follow
these steps to cut the roll and load a sheet.
1.
Hold down the Stop button for a second or more
to cancel printing.
2.
Select Paper Cutting in the printer menu and cut
the roll at the desired position.
(→P.132)
3.
Load paper of the type and size you have specied
in the printer driver and resend the print job.
(→P.93)
Follow these steps when printing on a roll.
1.
Hold down the Stop button for a second or more
to cancel printing.
2.
Change the printer driver settings to match the roll
already loaded, and then resend the print job.
Messages regarding paper
Error Message 689