Banding In Different Colors Occurs - Canon imagePROGRAF iPF6000S User Manual

Banding in different colors occurs

The roll is not loaded correctly in the Roll Feed Unit.
The paper feed amount is out of adjustment.
Printing does not proceed smoothly because print
jobs are interrupted during transmission.
In the printer menu, Print Length is specied in
Feed Priority.
The Printhead is out of alignment.
Streaks may occur if you set the Print Quality too
low and when High-Speed Printing is selected.
Downloaded from ManualsPrinter.com Manuals
Cause
Problems with the printing quality
Corrective Action
Remove the roll and reload it.
(→P.117)
Adjust the feed amount.
(→P.576)
Exit other applications and cancel other print jobs.
To adjust the feed amount, specify Band Joint in
Feed Priority in the printer menu.
(→P.576)
Adjust the Printhead alignment.
(→P.571)
Choose a higher level of Print Quality in the
Advanced Settings of the printer driver and try
printing again.
Printing in Draft, Standard, or High-Speed Printing
mode is useful in saving time and ink, compared to
printing in Highest or High modes, but the printing
quality is lower.
(→P.212)
Troubleshooting 669