Clearing Jammed Roll Paper
If paper from a roll becomes jammed, Paper jam. is shown on the Display Screen of the Control Panel.
Remove the jammed paper as follows.
Note
•
For instructions on removing a paper jam from a roll if the scrap of paper remains in the Paper Feed
Slot, see "Clearing Jammed Paper (Paper Feed Slot)". (→P.127)
1.
Open the Roll Feed Unit Cover. Use a commercially available cutter or the like to cut the paper
of the loaded roll.
Caution
•
When cutting paper, be careful to avoid injury and damaging the printer.
2.
Press the Load/Eject button.
3.
Remove the jammed paper.
•
If paper is jammed inside the Top Cover
1.
Open the Top Cover and move the Carriage to the side.
2.
Clear any jammed paper from inside the Top Cover.
After removing the paper, make sure there are no other scraps of paper in the printer.
Downloaded from ManualsPrinter.com Manuals
Problems Regarding Paper
Troubleshooting 655
Need help?
Do you have a question about the imagePROGRAF iPF6000S and is the answer not in the manual?
Questions and answers