Assembly Instructions - Landa SEA3-1100 Operator's Manual

Spray
gun
Safety
latch
High pressure
Hose
STep 1: Attach the high pressure
hose to the spray gun using teflon
tape on hose threads.
Outlet fitting
STep 4: Connect the high pressure hose to the out-
let discharge fitting. Push coupler collar forward until
secure. Connect the garden hose to pump water inlet.
Inspect inlets. CAUTION: Do not run the pump with-
out water or pump damage will result.

aSSembly INSTRUCTIONS

STep 2: Before installing nozzle,
turn on water supply and run ma-
chine allowing water to flush through
the system until clear.
98139990-9
LANDA SEA • 8.913-999.0 • Rev. 6/13
STep 3: Connect garden hose to
the cold water source.
Nozzle
Coupler
STep 5: Insert nozzle into coupler.
Release the coupler collar and
push the nozzle until the collar
clicks. Pull the nozzle to make sure
it is seated properly.
7