Table of Contents
Advertisement
Spray
Safety
Latch
High Pressure
Hose
STEP 1: Attach the high pressure
hose to the spray gun using teflon
tape on hose threads.
Discharge
Pressure
Coupler Collar
STEP 4: Connect the high pres-
sure hose to the pump discharge
fitting. Push coupler collar forward
until secure.
Pressure
Nozzle
Coupler
Collar
STEP 7: Pull the spring-loaded collar of the wand
coupler back to insert your choice of pressure nozzle.
Release the coupler collar and push the nozzle until the
collar clicks. Pull the nozzle to make sure it is seated
properly.
ASSEMBLY INSTRUCTIONS
Gun
Nozzle Extension
STEP 2: Attach nozzle extension
to spray gun/wand. Tighten both
by hand.
Pump
Fitting
Pump
High
Water Inlet
Hose
STEP 5: Connect the garden hose
to pump water inlet. Inspect inlets.
CAUTION: Do not run the pump
without water or pump damage
will result.
Wand
Coupler
9.800-087.0 • 8.941-124.0 • 8.941-459.0 • 8.919-016.0 • Rev. 02/17
Spray Gun/
Wand
STEP 3: Before installing nozzle,
turn on water supply and run ma-
chine allowing water to flush through
the system until clear.
Cold
Water
Source
Garden
Garden
Hose
Hose
STEP 6: Connect garden hose to
the cold water source.
5
Advertisement
Table of Contents
