Towing; Adjustable Backrest; Removable Rear Seat (Bearcat W/T Models) - Arctic Cat S2008ACAAAUSG Operator's Manual

2008
Table of Contents

Advertisement

! WARNING
Use caution and minimal speed
when operating the snowmobile in
reverse. Be sure the button is in
the desired position.
 NOTE: A warning buzzer will
sound when the transmission is in
the reverse position.

TOWING

If the snowmobile is to be towed by
another snowmobile, do not tow using
the loops in the skis. The tow rope
should be attached to the spindles.
ADJUSTABLE
BACKREST
The adjustable backrest is designed for
maximum comfort and safety. When
riding double, the backrest must be
adjusted to the most rearward position.
When riding single, the backrest
should be moved forward to a position
comfortable to the operator. Be sure to
maintain the backrest pad in a vertical
position in all locations. Also, be sure
to tighten all retaining knobs securely
after adjusting the backrest.
! WARNING
Moving the backrest forward lim-
its the seating capacity to one per-
son only.
Bearcat/Panther/T660 Models
GENERAL INFORMATION
REMOVABLE REAR
SEAT (Bearcat W/T
Models)
These snowmobiles are equipped with
a removable rear seat to allow for
additional cargo space when no pas-
senger is being carried. To remove the
rear seat, use the following procedure:
1. Move and lock the adjustable
backrest in the forward position.
2. Pull back on the seat latch handle
located at the bottom rear of the
seat.
3. Lift on the back of the seat and
move it rearward to remove it
from the tunnel.
! CAUTION
On models equipped with a seat
warmer, disconnect the warmer
wiring harness prior to fully
removing the seat.
To install the rear seat, use the follow-
ing procedure:
0734-425
T-Series Models
0742-494
0735-854
29

Advertisement

Table of Contents
loading

Table of Contents