Specifications; System; Memory; Input/Output - Advantech PCE-5026 User Manual

1.3

Specifications

1.3.1

System

 CPU: LGA1155-socket Core i7/i5/i3 and Pentium processors
 L2 Cache: Please refer to CPU specifications for detailed information.
 BIOS: AMI SPI BIOS (64 Mb SPI)
 System Chipset: Intel H61
 SATA hard disk drive interface: Four SATA 2.0(300MB/s) ports, can be
enabled or disabled in BIOS menu.
Note! PCE-5026 does NOT support PATA(IDE) interface.
1.3.2

Memory

 RAM:
– PCE-5026: Up to 16 GB (8GB per DIMM) in two 240-pin DIMM sockets. Sup-
ports dual-channel DDR3 1066/1333/1600* MHz SDRAM WITHOUT ECC
function.
Note! Wrong memory configuration may cause no boot or system instability
problems.
Only Intel generation 3 CPU can support up to DDR3 1600.
1.3.3

Input/Output

 Backplane Support:
Backplane Support Matrix Table:
Model
PCE-5026VG-00A1E
PCI bus: Four PCI masters to the backplane, 32-bit, 33 MHz PCI 2.2 compliant.

Enhanced parallel port: This EPP/SPP/ECP port can be configured for LPT1,

LPT2, LPT3 or disabled. A standard DB-25 female is connector provided.
 Serial ports: Two RS-232 serial ports
 PS/2 keyboard and mouse connector: One 6-pin mini-DIN connector is
located on the mounting bracket for easy connection to a PS/2 keyboard and
mouse via the Y-cable included in the package.
 USB port: Supports 10 USB 2.0 ports with transfer rate of up to 480 Mbps.
(6 ports are on the CPU card and 4 ports are on the backplane)
1.3.4

Graphics

Controller: Intel® HD Graphics controller is embedded in Intel processor.

 Display memory: Shared memory is subject to operating system (Please install
2 GB or above memory for basic system configuration).
CRT: Up to 2048 x 1536 resolution, 400 MHz RAMDAC.

 PCI express x16 slot on the backplane: A discrete graphics card can be
installed in the PCI-E x16 slot for stronger 2D/3D graphic capability.
Backplane
PCE-5BXX
3 PCE-5026 User Manual