Table of Contents
Advertisement
1.9
System Memory
PCE-5026 has two 240-pin memory sockets for Non-ECC DDR3 1066/1333/1600*
memory modules with maximum capacity of 16 GB. (Maximum 8 GB for each DIMM)
Note!
PCE-5026 does NOT support registered DIMMs (RDIMMs).
1.10
Memory Installation Procedures
To install DIMMs, first make sure the two handles of the DIMM socket are in the
"open" position; e.g., the handles lean outward. Slowly slide the DIMM module along
the plastic guides on both ends of the socket. Then press the DIMM module right
down into the socket, until you hear a click. This is when the two handles have auto-
matically locked the memory module into the correct position of the DIMM socket. To
remove the memory module, just push both handles outward, and the memory mod-
ule will be ejected by the mechanism in the socket.
1.11
Cache Memory
Intel CPU supports L3 cache. Please refer to the Intel CPU data sheet for detailed
information.
1.12
Processor Installation
Warning! Without a fan or heat sink, the processor will overheat and cause dam-
age to both the processor and the system host board computer. To
install a processor, first turn off your system.
The PCE-5026 is designed for Intel® LGA 1155 socket processors.
1.
Pull the bar beside the processor socket outward and lift it.
PCE-5026 User Manual
10
Advertisement
Table of Contents
