Table of Contents
Advertisement
Memo :
Blinking of the [POWER/CHARGE] lamp during
0
charging indicates the charge level.
[POWER/CHARGE] Lamp
Alternates between a blinking
orange light (4 times) and
light off (1 second)
Alternates between a blinking
orange light (3 times) and
light off (1 second)
Alternates between a blinking
orange light (2 times) and
light off (1 second)
Alternates between a blinking
orange light (blinks once) and
light off (1 second)
Light goes out
You can charge the battery even when operating
0
the camera recorder using the AC adapter.
Removing the Battery
1
.
1 Hold down the lock button (blue) at the
center of the [POWER ON/OFF] switch to set
to "OFF".
2 While pressing and holding the [BATT.
RELEASE] button, push up and remove the
battery in the direction of the arrow.
Caution :
Do not remove the battery when the [POWER
0
ON/OFF] switch is "ON".
Do not insert or remove the DC cable when the
0
battery is in use.
Leaving the camera recorder unused with the
0
battery inside will deplete the battery power
even if you set the [POWER ON/OFF] switch to
"OFF". Remove the battery if you are not using
the camera recorder.
Estimated Charging and Continuous
Operating Times
o Charging time
SSL-JVC50 (accessory)
Charge Level
* When the [POWER ON/OFF] switch is set to "OFF"
Less than 25 %
Memo :
Less than 50 %
Less than 75 %
o Continuous operating time
SSL-JVC50 (accessory) : Approx. 3 hrs 45 mins
Less than 100 %
*1
Fully charged
*2
Memo :
2
If you charge the battery immediately after using
0
while the battery is still warm, it may not be fully
charged.
For details, refer to the "INSTRUCTIONS" of the
0
battery.
When [System] is set to "4K" and all other
settings are in factory default (excluding the
lens)
When [System] is set to "HD" and all other
settings are in factory default (excluding the
lens)
Actual operating times may differ depending on
0
the age of the battery, charging condition, and
operating environment.
Operating time is shortened in cold
0
environment.
The operating time may shorten when power
0
zoom is used, accessories are connected, or
when the LCD monitor is frequently used.
For purchase of spare batteries and battery
0
charger, please contact the local dealers in your
area.
Charging the Battery
: Approx. 4 hrs
(*1)
Approx. 4 hrs (*2)
15
Advertisement
Table of Contents
