Table of Contents
Advertisement
P Focus Assist
"FOCUS" is displayed when auto focus is
0
activated.
Memo :
Displayed in the Display 0 screen only when
0
there is a change.
Q Date/Time Display
Displays the current date and time.
Memo :
The date/time display style can be specified in
0
[Main Menu] B [LCD/VF] B [Display Settings] B
[Date Style]/[Time Style].
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Date/Time] is
set to "Off".
When [Main Menu] B [System] B [Record Set]
0
B [Time Stamp] is set to "On", this item is not
displayed.
R Zoom Display
Displays the zoom position. (Zoom bar, value
0
or focal length)
.
The zoom bar will only be displayed for 3
0
seconds after the zoom operation is
activated.
The value or focal length will always be
0
displayed.
Value: Z00 to 99
Focal length: ** mm (** denotes number)
Memo :
This item may not be displayed depending on
0
the lens used.
You can specify the display method (Focal
0
Length/Number/Bar) in [LCD/VF] B [Display
Settings] B "Zoom".
This item will not be displayed when "Off" is
selected.
Displayed in the Display 0 screen only when
0
there is a change.
32
Display Screen
S Network Connection Icon
The network connection status is displayed
when [Main Menu] B [System] B [Network] is
set to "On".
This icon is not displayed when "Off" is selected.
Icon
Connection is not established
(starting up, preparing for
connection)
.
(Blink)
Connection is not established
(preparing for connection)
.
(Yellow)
Connection is established
.
When a USB adapter different
from the connection settings is
detected
.
(No display) When an incompatible USB
adapter is detected, or when
[Network] is set to "Off"
Memo :
When a cellular adapter that supports LTE
0
connection display is in use, "LTE" will appear to
the left of the above icon when LTE connection
is detected.
T Time Code (I)/User's Bit (J) Display
Displays the time code (hour: minute:
0
second: frame) or user's bit data recorded in
the SD card being played back.
Example of time code display:
0
0 0 : 0 0 : 0 0 : 0 0
.
* Colon (:) denotes non-drop frames and dot (.)
denotes drop frames.
Example of user's bit display:
0
F F EE DD 20
.
Memo :
You can specify whether to display the time
0
code, user's bit, or turn off the display in
[LCD/VF] B [Display Settings] B [TC/UB].
This item will not be displayed when "Off" is
selected.
Status
Advertisement
Table of Contents
