JVC GY-LS300CHU Instructions Manual page 30

Memo :
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Media
Remain] is set to "Off". However, warnings will
be displayed.
Displayed on the Display 0 and Display 1
0
screens only in the case of warnings. (When the
remaining time is shorter than 3 minutes)
The icons appear on all display screens in the
following cases.
When recording is performed to only one
0
of the slots while [Main Menu] B [System]
B [Record Set] B [Slot Mode] is set to
"Dual".
When recording is performed to only one
0
of the slots while [Main Menu] B [System]
B [Record Set] B [Record Format] B
[System] is set to "HD+Web".
The displayed time is an estimate.
0
D Resolution
Displays the video image resolution.
Memo :
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Record
Format] is set to "Off".
E Frame Rate/Bit Rate
Displays the frame rate and bit rate in pairs.
Memo :
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Record
Format] is set to "Off".
F Audio Level Meter
Displays the audio levels of CH1 and CH2.
0
a appears on the screen when in the Auto
0
mode.
4030 20
.
When [Main Menu] B [System] B [Record
0
Set] B [Rec Mode] is set to "Frame Rec" or
"Interval Rec", audio cannot be recorded and
the audio level meter is grayed out.
Memo :
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Audio Meter]
is set to "Off".
30
Display Screen
10 0
G Image Stabilizer Mark
Displayed when the image stabilizer is ON.
: When [OIS] is set to "On".
j
Memo :
If image stabilizer is set to "OFF" when the
0
Display 0 screen is displayed, h appears for 3
seconds.
Displayed in the Display 0 screen only when
0
there is a change.
H Volume Operation Indicator
The display appears when the volume (0 to 15)
of the headphone or speaker changes.
.
Memo :
There is no audio output from the speaker in
0
Camera mode.
I White Balance Mode
Displays the current white balance mode.
(*****K indicates color temperature)
A< *****K> : When the [WHT BAL B/A/PRST]
switch is set to "A" in the Manual
White Balance mode.
B< *****K> : When the [WHT BAL B/A/PRST]
switch is set to "B" in the Manual
White Balance mode.
P< *****K> : When the [WHT BAL B/A/PRST]
switch is set to "PRST" in the
Manual White Balance mode.
A<R*****K>/ : The white balance of the subject
with respect to the color
B<R*****K>/
temperature setting is appropriate
P<R*****K>
when the WB indicator is set to
"On" in the Manual White Balance
mode.
a <FAW> : During Full Auto White Balance
mode.
Z <FAW> : Locked in the Full Auto White
Balance mode.
Memo :
Displayed in the Display 0 screen only when
0
there is a change.
0
12