Playing Recorded Clips - JVC GY-LS300CHU Instructions Manual

Playing Recorded Clips

Use the operation buttons on the side control panel
of the camera recorder to play back.
A
B
C
.
A Set Button (R)
Plays back/pauses the clip pointed by the
0
cursor.
You can press the cross-shaped button (HI)
0
to perform frame-by-frame forward playback
during pause mode.
B Cross-shaped Button (JKH I)
[J/K] Button:
0
Skips in the reverse or forward direction.
[H/I] Button:
0
During Playback:
0
Fast forwards in the reverse or forward
direction.
While paused:
0
Frame-by-frame playback in the reverse
or forward direction.
C [CANCEL/STOP] Cancel/Stop Button
Stops playback.
1 In the thumbnail screen, move the cursor to
the clip to be played back.
Move the cursor to the clip to be played back
using the cross-shaped button (JKH I).
2 Press the Set button (R).
Playback of the selected clip starts.
Audio Output during Playback
You can confirm the playback sound from the
0
monitor speaker, or the headphone connected
to the [x] terminal. When a headphone is
connected to the [x] terminal, sound cannot be
output from the monitor speaker.
Adjust the volume of the monitor speaker and
0
headphone using the J / K volume buttons on
the side of the camera recorder.
Displaying Information during Shooting
Pressing the [DISPLAY] button during playback
displays the display screen.
Pressing the [MARKER/6] button each time
changes the shooting information displayed
(camera information display and hide display).
Playing Recorded Clips
23