Setup Menu Mode - A&D SB-30 Instruction Manual

User Menu Mode /
NAME/CODE DESCRIPTION
A1 Selects the baud rate for data transmission through the serial port.
Baud Rate
Selects the number of data bits and parity of serial transmission.
A2
Data Bits and
Parity
A3 Selects when data will be sent out of the serial port to a printer or
computer:
Mode of Serial
Transmission
"d" = Demand mode; send data when a PRINT command is issued
A4 Selects the data format to be transmitted via the serial port to a
printer or computer.
Serial Data
Format
"1" = Toledo 8213 Format
A5 Allows the lb/kg key to be disabled so that an operator cannot acci-
dentally press the key and change the displayed units.
Disable the
"0" = Disable the lb/kg key
lb/kg Key

Setup Menu Mode

SB-30/70/150 scale include a Setup menu which determines the scale's display mode, allows
scale calibration and also contains the scale's adjustable functional parameters. It consists of 5
separate menu selections, each also with its own sub-menu of choices.
To change a listed parameter, you must first enter the Setup Menu mode. Once there, four of the
front panel keys become directional navigators to move around in the menus, and one key is used
to save or SET the selections.
Continued
USER MENU DESCRIPTIONS
"8n" = 8 data bits with no parity bit and one stop bit
"7O" = 7 data bits with odd parity bit and one stop bit
"7E" = 7 data bits with even parity bit and one stop bit
"7n" = 7 data bits with no parity bit and two stop bits
"C" = Continuous mode; send data continuously
from the printer, computer, or scale.
"0" = Consolidated Controls Format
"3" = Transcell Technology Format
"4" = Detecto ASD Format
"6" = Fairbanks 70-2453-4 Format
SB-30/70/150 Operation Manual
"2" = A&D/NCI/CAS Format
"5" = Triner Format
"1" = Enable the lb/kg key
CODE/VALUE
2400√ √ √ √
1200
4800 9600
8n√ √ √ √
7O
7E
7n
C
d√ √ √ √
0
1
2
3√ √ √ √
4
5
6
0
1√ √ √ √
7