Removal; Disassembly; Assembly - Sea-doo 2004 3d rfi Shop Manual

Section 13 PROPULSION
Subsection 04 (VARIABLE TRIM SYSTEM)

REMOVAL

Remove nut no. 1, bolt no. 2, flat washers no. 3,
and bushing no. 4.
Remove venturi screw.
1 2
3
F22J08A
1. Nut
2. Bolt
3. Venturi screw
To remove trim ring/nozzle no. 11, loosen screws
no. 12.

DISASSEMBLY

Loosen nut no. 6 from support no. 9.
Remove rubber spacer no. 7 and half bushings
no. 8.
Unscrew adjustment knob no. 10 from pivot no. 5.

ASSEMBLY

Assembly is essentially the reverse of disassem-
bly procedures. Refer to the main illustration at
the beginning of this sub-section for proper torque
specifications and service products to be used.
58
smr2004-3D
www.SeaDooManuals.net