Battery Removal And Storage; Boat Cleaning/Repair; Boat Protection - Sea-doo 210 Challenger Series Operator's Manual

STORAGE
Battery Removal and
Storage
For battery removal, cleaning and stor-
age, contact your authorized Sea-Doo
Sport Boats dealer.

Boat Cleaning/Repair

Clean boat and trailer. Refer to
CARE
.
Replace damaged labels/decals.
If repairs are needed to the body or
to the hull contact your authorized
Sea-Doo Sport Boats dealer. For paint
touch up to mechanical parts use BRP
spray paint. For minor gelcoat repairs,
a Gelcote repair kit is available from
Gelcote International at www.gel-
cote.com.

Boat Protection

The engine storage cover should be
left partially opened during storage
(detach the four (4) gas shocks from
the cover to prevent full opening).
Using a flat screwdriver, lift the tab
locking the shock gas end.
lmo2010-003-117_a
1. Retaining tabs
Detach all shock gas end.
Block and leave engine cover lid open
slightly.
This will avoid engine compartment
condensation and possible corrosion.
If the boat is to be stored outside, cover
it with a vented opaque tarpaulin to
prevent UV (ultraviolet) rays and grime
______________
110
from affecting the plastic components,
boat finish, as well as preventing dust
accumulation.
NOTICE
stored in direct sunlight. UV radia-
tion will dull finishes. The boat must
never be left in water for storage.
BOAT
For the storage period, block the
wheels and raise the bow slightly
with the trailer jack (if so equipped)
so drainage can take place. Ensure
the drain plug is unscrewed and unob-
structed.
Never leave the boat