“Audio Setup” Is Selected - Denon ADV-1000 Operating Instructions Manual

(4) "AUDIO SETUP" is selected
1
See page 73.
2
3
Use the
desired setting, then press the ENTER button.
• DIGITAL OUT
Use this to select the digital output's signal format.
• LPCM SELECT (96 kHz / 48 kHz)
Use this to set the digital audio output when playing
DVDs recorded in linear PCM audio.
To exit the audio setup mode
Use the
"DVD SETUP MENU", then press the ENTER
button.
• The screen returns to as it was in step 2.
4
Use the
ENTER button.
2 When "DIGITAL OUT" is selected.
• NORMAL (Factory default)
Make the selection when playing back in surround
playback a DVD that has been recorded with Dolby
Digital or DTS on this unit.
The Dolby Digital or DTS digital signal is also output
from the digital output jacks.
• PCM
DVDs that were recorded in Dolby Digital are
converted to linear PCM 48 kHz/16 bit (2 channels).
Make the selection when making a digital recording.
DVDs recorded with DTS are not converted and
digital recording is not possible.
To exit the digital out mode
Press the ENTER button, you can go back to the
Downloaded From Disc-Player.com Denon Manuals
2,3,4
1
and cursor buttons to select the
and cursor buttons to select
and cursor buttons to select the
desired setting, then press the
POWER
VCR POWER
TV POWER
DISPLAY RETURN INPUT MODE SURROUND
MENU FUNCTION
ENTER
2,3,4
MODE
VOLUME
BAND
MUTE
CH SHIFT
NTSC/PAL STATUS
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
PROG/DIRECT REPEAT A-B REPEAT RANDOM
CH.SELECT T.TONE SDB/TONE SURR.PARA
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
REMOCON MODE
Remote control unit
d
ENTER
Remote control unit
Remote control unit
d
ENTER
Remote control unit
B
AUDIO SE TUP
D I G I TAL L OU OUT NORMA ORMAL
OF F
L PCM M SEL ECT
( 9 6 kHz --> 48kHz)
> > DVD SETUP MENU
DVD SETUP MENU
SELECT : DEC I S ION: ENTER BUTTON
B
D I G I TAL OUT
D I G I TAL OU OUT NO NORM RMA L
PCM
SELECT : DEC I S ION: ENTER BUTTON
ENGLISH
79