Audio Setup; Ext. In Setup; S 2Ch Direct/Stereo; Downmix Option - Denon AVR 4308CI - AV Network Receiver Owner's Manual

Audio Setup

Make settings for audio playback.
F Menu tree F
Manual Setup
Audio Setup
a EXT.IN Setup
s 2ch Direct/Stereo
d Downmix Option
f Auto Surround Mode
g Manual EQ
a EXT. IN Setup
Make speaker settings for EXT. IN mode playback.
Surround Speaker
Select the surround speakers to use.
A B A+B
[Selectable items]
Subwoofer Level
Set the subwoofer level for playback.
Select according to the player in use.
[Selectable items] 0dB +5dB +10dB
We recommend setting to "+15 dB" .

s 2ch Direct/Stereo
Make speaker settings for 2-channel mode playback.
Setting
To change the settings, select "Custom" .
[Selectable items]
z : Use the same settings as in "Speaker Setup" .
Front
Select front speaker size.
[Selectable items]
Subwoofer
Select subwoofer use.
[Selectable items]
Subwoofer Mode
Select low range signal to be reproduced by subwoofer.
[Selectable items]
Crossover
Select crossover frequency from which subwoofer handles low range
+15dB
signal.
[Selectable items]
Distance FL
Set distance from listening position to front left speaker.
[Variable range]
Distance FR
Set distance from listening position to front right speaker.
[Variable range]
z
Basic Custom
Large Small
Yes No
LFE LFE+Main
40Hz 60Hz 80Hz 90Hz 100Hz
110Hz 120Hz 150Hz 200Hz 250Hz
0.0ft ~ 60.0ft
0.0ft ~ 60.0ft
d Downmix Option
Set dynamic range for downmix playback of Dolby Digital
sources.
[Selectable items] ON OFF
• Set this to "ON" if the sound from the front speakers seems
distorted.
• When not using the center speaker or surround speakers, the
playback sound is down-mixed and output from the front speakers.
f Auto Surround Mode
Make setting for memorizing surround mode setting for
each input signal type.
[Selectable items] ON OFF
• The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals
listed below.
q Analog and PCM 2-channel signals
w Dolby Digital and DTS 2-channel signals
e Dolby Digital and DTS multi-channel signals
r Multi-channel signals other than Dolby Digital and DTS (PCM,
DSD, etc.)
• When playing in the PURE DIRECT mode, the surround mode does
not change even if the input signal is changed.