Setting The Dvd Auto Power Off; After Completing System Setup - Denon ADV-1000 Operating Instructions Manual

ENGLISH

[4] Setting the DVD auto power off

• The ADV-1000 is equipped with a function that automatically
switches the power to standby if no operation is performed for 30
minutes while in the stop mode with the function set to DVD. Here,
set whether to turn this function on or off.
• The factory default setting is "NO".
1 To perform these operations from places other than the
system setting change menu, see page 26.
2 At the "SYSTEM SETUP MENU".screen, select "DVD AUTO
POWRE OFF".and press the ENTER button.
Remote control unit
• Switch to the "DVD AUTO POWER OFF".screen.
( D V D F U N C T I O N O N L Y ) ( D V D F U N C T I O N O N L Y )
A U T O P OW ER OFF AUTO POWER OFF
SELECT :
3 Select "YES" or "NO".
• YES: The auto power off function is active when the
function is set to DVD.
• NO: The auto power off function does not work.
4 Enter the setting.
• The SYSTEM SETUP MENU reappears.
30
Downloaded From Disc-Player.com Denon Manuals
ENTER
Remote control unit
D V D A U T O P O W E R O F F B
Y E S NO NO Y E S
FINISH: ENTER BUTTON
ENTER
Remote control unit

[5] After completing system setup

• Once the speaker settings, delay time setting and channel level
adjustments are made, there is no need to reset them unless the AV
components or speakers are changed or the speakers are moved to
different positions.
• Change the DVD auto power off settings as necessary.
1 At the SYSTEM SETUP MENU, press
the SETUP button.
• The changed settings are entered and
the on-screen display turns off.
This button can be pressed at any time during the system
setup process to complete the process.
NOTE:
• If the quick system settings are selected after setting up the
system using the system setting change menu, the speaker and
delay time settings are changed to the values preset for the quick
system settings.
SETUP
Remote control unit