Connecting Video Components; Connecting A Tv/Dbs Tuner; Connecting A Cs Tuner; Connecting A Video Decks - Denon ADV-1000 Operating Instructions Manual

(2) Connecting video components

• To connect the video signal, connect using a 75 Ω/ohms video signal cable cord. Using an improper cable can result in a drop in video quality.
• When making connections, also refer to the operating instructions of the other components.

Connecting a TV/DBS tuner

TV/DBS
• Connect the TV's or DBS tuner's video
output jack (VIDEO OUTPUT) to the
(yellow) TV/DBS IN jack using a
VIDEO
75 Ω/ohms video coaxial pin plug cord.
• Connect the TV's or DBS tuner's audio
output jacks (AUDIO OUTPUT) to the
AUDIO TV/DBS IN jacks using pin plug
cords.
• For devices with optical digital outputs,
connect the digital output terminal to the
ADV-1000's DIGITAL TV/DBS IN terminal
using an optical transmission cable.
TV or DBS tuner
B
OPTICAL
OUT
Note on connecting the digital input jacks
• Only audio signals are input to the digital input jacks.
• Use optical cables for optical connections, removing
the cap before connecting.

Connecting a video decks

Video input/output connections:
• Connect the video deck's video output jack (VIDEO OUT) to the
the video deck's video input jack (VIDEO IN) to the
Ω/ohms video coaxial pin plug cords.
Connecting the audio output jacks
• Connect the video deck's audio output jacks (AUDIO OUT) to the
video deck's audio input jacks (AUDIO IN) to the
Downloaded From Disc-Player.com Denon Manuals
AUDIO VIDEO
OUT OUT
R L
R L
S VIDEO
Y P /C
B B
COMPONENT VIDEO OUT
VIDEO
VCR OUT jacks using pin plug cords.
AUDIO
Monitor TV
VIDEO
IN
MONITOR OUT
• Connect the TV's video
input jack (VIDEO INPUT) to
the MONITOR
VIDEO
OUT jack using a 75
Ω/ohms video coaxial pin
plug cord.
MON.OUT IN IN IN IN OUT MON.OUT IN IN IN
TV/DBS V.AUX VCR TV/DBS V.AUX
P /C
R R
PRE OUT
SUB WOOFER IN OUT IN IN
CDR/ TV/DBS V.AUX
TAPE
AUDIO
L R L R
VIDEO (yellow) VCR IN jack, and
(yellow) VCR OUT jack using 75
AUDIO VCR IN jacks, and the

Connecting a CS tuner

V.AUX
• Connect the CS tuner's video output jack (VIDEO OUTPUT) to
(yellow) V.AUX IN jack using a 75 Ω/ohms video
the VIDEO
coaxial pin plug cord.
• Connect the CS tuner's audio output jacks (AUDIO OUTPUT) to
the V.AUX IN jacks using pin plug cords.
AUDIO
• For devices with optical digital outputs, connect the digital
output terminal to the ADV-1000's DIGITAL V.AUX. IN terminal
using an optical transmission cable.
CS tuner
B
VIDEO AUDIO
OUT OUT
R L
R L
VIDEO LOOP ANT.
IN OUT
VCR
FM COAX. 75
L AM
R
IN OUT IN IN OUT
V.AUX
VCR TV/DBS
DIGITAL(OPTICAL)
R L
L R
R L R L
R L R L
OUT IN
AUDIO
Video deck
ENGLISH
OPTICAL
OUT
IN OUT
VIDEO
9