ENGLISH
16
LISTENING TO THE RADIO
Auto tuner presets
(1)
Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels 1 to 40.
NOTE:
• If an FM station cannot be preset automatically due to poor reception, use the "Manual tuning" operation to tune in the station, then preset it
using the manual "Preset memory" operation.
1
Using the TUNER function, press and
hold the TUNING + and TUNING –
buttons of the main unit for 2 seconds
or longer.
• "AUTO PRESET?" and "–: NO/+:
START" will alternately appear on the
display of the main unit.
• Press the TUNING – button to cancel.
2
Use the TUNING + button to select
"START".
"SEARCH" flashes on the display and
searching begins.
"COMPLETED" appears once searching is
completed.
Tuning
(2)
Example: Tuning in FM/AM stations
Before operating the remote control unit!
Be sure to press the proper remote control mode selector
button to set the remote control unit to the AV mode.
1
Turn the FUNCTION/SELECT knob of the main unit or press
the FUNCTION button of the remote control and select
"TUNER".
FUNCTION
/ SELECT
Main unit
2
Select "FM" or "AM".
• The selected "FM AUTO", "FM MONO" or "AM" is
displayed.
• When using the remote control, the mode button is used to
select FM AUTO and MONO.
BAND
Main unit
52
Downloaded From Disc-Player.com Denon Manuals
- TUNING +
Main unit
- TUNING +
Main unit
2
3
1
TUNER/TV/VCR
FUNCTION
Remote control unit
BAND
MODE
Remote control unit
POWER
VCR POWER
TV POWER
MENU
2
MODE
2
BAND
CH
3
TU
SUB TITLE
AUDIO
3
Adjust the receiving frequency.
• When a station
is received, the
" T U N E D "
indication will
- TUNING +
light.
NOTES:
A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far
from the TV as possible.
Auto tuning
• When one of the Tuning +/– button is pressed, the frequency
changes in steps of 0.2 MHz in the FM band, 10 kHz in the AM
band.
• If one of the Tuning +/– button is held for over 1 second, the
frequency continues to change when the button is released
(auto tuning) and stops when a station is tuned in.Tuning will not
stop at stations whose reception is poor.
• To stop the auto tuning function, press the Tuning +/– button
once.
FM Stereo Reception
• When a program being broadcast in "FM AUTO" is received,
the "ST" indicator lights and the program is received in stereo.
• If reception is poor and there is much noise in the stereo signals,
press the BAND or MODE button to set the FM MONO mode.
1,2
FUNCTION
1
ENTER
VOLUME
MUTE
SHIFT
NTSC/PAL
STATUS
MEMO
ANGLE
TOP MENU
TU
Main unit
Remote control unit