Q24 Tape Library
3.2.9.4
Reboot of the library
NOTE
This page is used to perform a library reboot. During a reboot, the RMU's connection to the library
may be lost, depending on the timing of the reboot. This is because the RMU web page refreshes itself
at intervals defined by a default time delay. If the reboot completes successfully during this delay, the
connection will remain intact. If not, the user will have to restart the RMU login.
3.2.9.5
Viewing Library Logs
This page allows the user to view the library logs.
The user can specify the following information:
Log Type:
o Error Trace
o Informational Trace
o Warning Trace
o Configuration Change Trace
o Standard Trace
© Copyright QUALSTAR 2014
Ensure that the library is idle before attempting to perform any
remote operations that will take it offline.
Some options of the RMU take the library offline. This inactive
mode can interfere with host‐based application software,
causing data loss.
Figure 55 Reboot the library
Figure 56 Library logs
Installation and Operations Manual
53