D-Link SmartPro DGS-1500-20 User Manual page 71

5 Configuration
2) Selecting the field of interest will display the related columns in the lower part of the page. Enter the
filtering mask and click Apply when done. A filtering mask is to specify the digit that you want to check. For
example, if you want to check a network of 192.168.1.0/24, then you should enter the IP mask as
255.255.255.0.
3) After the Profile ID has been created, click Continue to go back to the main Access Profile List page,
clicking the Edit / New Rules button to enter the Access Rule List page.
Profile ID: Indicates the corresponding access profile Identification number.
Access ID: Indicates the access rule Identification number.
Profile Type: Displays the profile type.
Summary: Displays the access rule summary.
Action: Displays the access rule action.
To add a new rule, click Add:
Figure 5.87 – Add Access Profile
Figure 5.88 – Access Rule List
NOTE: You cannot select Payload in a MAC ACL,
or L2 Header in IP ACL.
Figure 5.89 – Access Rule List
66
D-Link Web Smart Switch User Manual