Advanced Setup - Dahua NVRPRO User Manual

Please refer to the following sheet for detailed information.
Parameter
Ethernet
DHCP
Device ID
TCP Port
HTTP Port
UDP Port
Max Connection
Network
transmission QoS

Advanced setup

The remote host can choose multi-cast and PPOE to set.
Figure 8-24 Network
Function
Please select the network card first.
Dynamically get IP address. You can get the device IP from
the DHCP server if you enabled this function.
The ID for recognition in network
Default value is 37777.
Default value is 80.
Default value is 37778.
Network user max amount. The value ranges from 1 to 10.
You can set the priority between fluency and video quality.
System can automatically adjust the bit stream according to
the network bandwidth.
95