Advanced Setup; Ip Filter - Dahua NVRPRO User Manual

6.6.5.1 Advanced Setup

Advanced setup interface is shown as in Figure 6-23. Please draw a circle to enable
corresponding function and then double click current item to go to setup interface.

6.6.5.2 IP Filter

IP filter interface is shown as in Figure 6-24. You can add IP in the following list. The list supports
max 64 IP addresses.
Please note after you enabled this function, only the IP listed below can access current NVR.
If you disable this function, all IP addresses can access current NVR.
Figure 6-22
Figure 6-23
Figure 6-24
42