General - Dahua NVRPRO User Manual

In main menu, highlight setting icon and double click mouse. System setting interface is shown as
below. See Figure 6-14.
Important
Please note you need to have the proper right to implement the following operation.

6.6.1 General

General setting includes the following items. See
System time: Here is for you to set system time
Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.
Date separator: There are three denotations to separate date: dot, beeline and solidus.
DST: Here you can set DST time and date. Please enable DST function and then click set
button. You can see an interface is shown as in Figure 6-16. Here you can set start time and
end time by setting corresponding week setup. In Figure 6-16, enable date button, you can
see an interface is shown as in Figure 5-5. Here you can set start time and end time by
setting corresponding date setup.
Time format: There are two types: 24-hour mode or 12-hour mode.
Figure 6-13
Figure 6-14
Figure 5-3 .
X357H357H357H X
36