Enable/Disable Record; Enable All Channel Recording - Dahua NVRPRO User Manual

There are three statuses: schedule/manual/stop. Please highlight icon
corresponding channel.
Manual: The highest priority. After manual setup, all selected channels will begin ordinary
recording.
Schedule: Channel records as you have set in recording setup (Main
Menu->Setting->Schedule)
Stop: All channels stop recording.

6.7.4.3 Enable/disable record

Please check current channel status: "○" means it is not in recording status, "●" means it is in
recording status.
You can use mouse or direction key to highlight channel number. See Figure 6-63.

6.7.4.4 Enable all channel recording

Highlight ○ below All, you can enable all channel recording.
All channel schedule record
Please highlight "ALL" after "Schedule". See Figure 6-64.
When system is in schedule recording, all channels will record as you have previously set
(Main menu->Setting->Schedule).
The corresponding indication light in front panel will turn on.
Figure 6-62
Figure 6-63
to select
70