Record - Dahua NVRPRO User Manual

Parameter
Alarm output
Trigger
Refresh

8.3.3.4 Record

Record control interface is shown as in Figure 8-41.
Please refer to the following sheet for detailed information.
Parameter Function
System enables auto record function as you set in schedule setup
Schedule
(chapter 7.3.2.2).
Enable corresponding channel to record no matter what period
Manual
applied in the record setup.
Stop current channel record no matter what period applied in the
Stop
record setup.
Function
For 1U series product, there are three channels.
For 2U series product, there are six channels. The 6
the controllable +12V alarm output.
Please click the corresponding number and then click the trigger
button.
Enable/disable alarm output.
Please note once you activate an alarm manually, you need to
click the output channel number again and then click trigger button
to disable it. Otherwise the alarm can not be cancelled.
Search alarm output status.
Figure 8-41 Record
th
channel is
111